how to swap extension numbers

[config5623]

Hi Team.

I'm new to Meridian and have a customer that wants to swap the extension numbers on two phones. Not move the phones but just swap the extension numbers. I looked through my manual last night but couldn't find the LD number or process to use.
Any help appreciated.
Thanks

 

[bhassell2000]

It depends on if its an analog or digital set. It could be LD 10 or LD 11




Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[KCFLHRC]

Analog phones in LD 10 and digital phones in LD 11

 

[config5623]

Hi Buddy,

They are both digital 2008's. One with a display. Would you tell me the commands in LD 11?

Thanks again for your help.

 

[KCFLHRC]

The best thing to do is print out both the phones in LD 20 and then remove them and duplicate them. Easier yet is to go out and swap the cross connects and phones if your unfamiliar with the programming. That way everyone keeps their old phone too.

 

[config5623]

Buddy, the only issue is the phones aren't moving because one has a display. Just the extension numbers.

 

[bhassell2000]

ld 11
chg
2008
tn is the tn the phone is on
press enter until you get to DN prompt
At DN prompt then the string that shows in pbx now like KEY 0 scr 1234 0
press enter untill you get back to req prompt

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[KCFLHRC]

Actually there is no DN prompt, just key 0 scr xxxx