Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to stop the "twin"
- Thread starter fsqueeen
- Start date
The old method used to be placing a var in a text file at the start of the script and setting it to zero at the end.
I use this method very successfully although there is probably a more elegant solution.
The script will not run again if the previous running failed in some way but I overcome that with the var I use, epoc time value, a quick check of it's value how long since the last run. If over a given time, (you decide the duration) then run it again.
Keith
I use this method very successfully although there is probably a more elegant solution.
The script will not run again if the previous running failed in some way but I overcome that with the var I use, epoc time value, a quick check of it's value how long since the last run. If over a given time, (you decide the duration) then run it again.
Keith
- Status
Similar threads
