Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to setup queries to my PBX using SNMP?

Status
Not open for further replies.
oscar01

oscar01

Programmer
Apr 26, 2007
247
US
I have CM6.3 and would like to setup queries using SNMP to check the status of certain services every few minutes. How would I set this up?

Thanks
 
Sort by date Sort by votes
You can set up snmp traps from within the smi web interface ( v ip of your proc r browse to it) you can also depending on your snmp tool interrogate logs from CM , CDOM etc , in the first instance check out the web pages and all will become obvious

APSS (SME)
ACSS (SME)
ACIS (UC)
 
Upvote 0 Downvote
You can set up snmp traps from within the smi web interface ( v ip of your proc r browse to it) you can also depending on your snmp tool interrogate logs from CM , CDOM etc , in the first instance check out the web pages and all will become obvious

APSS (SME)
ACSS (SME)
ACIS (UC)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lopes1211
  • Locked
  • Question
How is CMS HA Setup?
Replies
1
Views
234
avAyATEKky
avAyATEKky
Avaya_Enjoyer
  • Question
Using a virtual station to record a call?
Replies
5
Views
436
YPC
YPC
Turtlepuke
  • Locked
  • Question
Quickest Way To Get All My Announcements On A New Media Server 1
Replies
3
Views
704
JefferP
JefferP
fondog2
  • Locked
  • Question
Click to call from teams using workplace
Replies
0
Views
98
fondog2
fondog2
Turtlepuke
  • Locked
  • Question
Ringdown/Hotline How To Documents?
Replies
3
Views
212
ZeroZeroOne
ZeroZeroOne

Part and Inventory Search

Sponsor

Back
Top