Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to set up remote administration
- Thread starter gunnaghyn
- Start date
1. On MQ manager on HP-UX define channel:
DEFINE CHANNEL (SYSTEM.ADMIN.SVRCONN) CHLTYPE (SVRCONN)
2. ON HP-UX start commang server:
strmqcsv MQ_manager_name
3. Check if listener works
(form w2k machine do: telnet hp-ux_ip port_number)
mcauser sets provilage for anyone who connect using SYSTEM.ADMIN.SVRCONN to provilage as that user has on system.
I think it is goog idea to enable default conversion in /var/mqm/conv/table/ccsid.tbl
DEFINE CHANNEL (SYSTEM.ADMIN.SVRCONN) CHLTYPE (SVRCONN)
2. ON HP-UX start commang server:
strmqcsv MQ_manager_name
3. Check if listener works
(form w2k machine do: telnet hp-ux_ip port_number)
mcauser sets provilage for anyone who connect using SYSTEM.ADMIN.SVRCONN to provilage as that user has on system.
I think it is goog idea to enable default conversion in /var/mqm/conv/table/ccsid.tbl
- Status
Similar threads
