Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to set up Off Premise on a Flash
- Thread starter regent
- Start date
sprucegrover
Technical User
Go into the mailbox via F981 & password
Press Admin or '8'
Press'6' for Off Premis Notification menu
Press ADMIN or 1 for setup
Press PAGER or 3 to choose destination
Enter the pager number
Press OK or #
AT the ADD prompt press '3' for each 4 second pause to allow time for the pager to answer and play a message
At SHOW enter the message to send the pager. Default is the Voicemail DN #
choose type of messages, default is NEW. Press CHNG or 1 to change to URGENT
Press RLS to quit
Press Admin or '8'
Press'6' for Off Premis Notification menu
Press ADMIN or 1 for setup
Press PAGER or 3 to choose destination
Enter the pager number
Press OK or #
AT the ADD prompt press '3' for each 4 second pause to allow time for the pager to answer and play a message
At SHOW enter the message to send the pager. Default is the Voicemail DN #
choose type of messages, default is NEW. Press CHNG or 1 to change to URGENT
Press RLS to quit
Voice mail box must be programmed to allow to access out dial in voice mail admin (F983)
Marv
TeleMarv Services
Marv
TeleMarv Services
- Status
Similar threads
- Locked
- Question
