Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to set up access ports

Status
Not open for further replies.

jackthe

Technical User
Nov 1, 2007
14
AU
I have ccm rls 6
and call pilot rls 4.5
How do i set up to allow access ports to works, have tried and in the scipt it skips over the voice segment part
thanks
 
Have you built and acquired the IVR CDN?
Have you built and acquired the IVR Voice Ports?
 
Jackthe,
Do you have keycodes for Access on the CCMS and CP?

Jeff
 
On the product DVD, there should be Nortel documentation. The document you want is: 297-2183-931, Contact Center, Communications Server 1000/Meridian 1 and Voice Processing Guide.

You are required to build a separate IVR ACD-DN for the access voice ports.

The information you need is in two or three places in the document. Be careful you are looking as Access and not GIVE IVR port information.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top