I use a number of modems (leased line not dial up) to control equipment through windows terminal.My problem is that even i configure the modems with the same settings , to communicate with modems using win terminal i have to set terminal speed for some modems 9600b/s and for some other modems 19200.I want your help to explain to me what parameter controls terminal speed connection.
Also Note that I use the
following modems:
8840R Telebit octocom rack mounted cards as master
External s/a modems Octocom models:8396A,8396R,8424A as
slave modems
They have a console port but iam programming them through
DCE interface.
Note then i connect them through data switch to a terminal
monitor and it will be better for me if all have the same settings so that to need only to move data switch and not every time to change serial port settings.
Also if possible explain to me how to find out if my leased line modems are synchronous or not.Can i set synchronous or asynchronous mode.I have a command: AT&M0=Asynchronous Mode
Thank you very much.
Also Note that I use the
following modems:
8840R Telebit octocom rack mounted cards as master
External s/a modems Octocom models:8396A,8396R,8424A as
slave modems
They have a console port but iam programming them through
DCE interface.
Note then i connect them through data switch to a terminal
monitor and it will be better for me if all have the same settings so that to need only to move data switch and not every time to change serial port settings.
Also if possible explain to me how to find out if my leased line modems are synchronous or not.Can i set synchronous or asynchronous mode.I have a command: AT&M0=Asynchronous Mode
Thank you very much.