How to set QOS in a BES 50

[mando1]

Any one have a step by step to set qos in a BES 50 Switch ? Data traffic is H 323 trunks between two BCM 400's. I need the dscp settings . Thaks is advance/.

 

[MagnaRGP]

Direct quote from the BES50 usage manual NN47924-301:

Enabling IP DSCP priority
You can select Differentiated Services Code Point (DSCP) service as the
method for prioritizing Layer 3/4 traffic. The subsequent mapping is to a
Class of Service value on the switch.
Procedure steps
Step Action
1 From the main menu, choose Applications > Priority > IP DSCP
Status.
2 Select the Enabled check box.
3 Click Submit.
—End—

 

[mando1]

Thanks. I thought maybe I had to create some custom class of service etc. Thanks

 

[MagnaRGP]

Nope. BES equipment is designed to be as basic as possible while still allowing functionality's needed for convergence.

 

[mando1]

Ok Thank you very much for your help !!!