how to set aloha printer print logo on the receipt

[wlh546484]

i have aloha system. version 6.4
how can i to setup allow aloha to print restaurant logo on the receipt.

 

[shermangfn]

Create a receipt logo in bitmap (.BMP) form. Do not use multiple colors since the printer only uses black and white hues. Keep the bitmap file as small as possible since the Aloha application software must download (at 9600 BPS) the logo each time it prints a receipt.



To enable the receipt logo, edit the ALOHA.INI file in the NEWDATA folder, and add the following lines if the do not already exist:

PRINTERBITMAP=y
Replace y with the name of the receipt logo, for example, RECEIPT.BMP. The file must reside in the BMP folder.

PRINTERBITMAPSIZE=n
Set n to 0, 1, 2, or 3. '0' stretches the logo horizontally and vertically. '1' stretches the logo vertically. '2' stretches the logo horizontally. '3' displays the logo normally. The maximum logo width is 192 pixels if '0' or '2' is specified. The maximum logo width is 320 pixels if '1' or '3' is specified. There is not limit to the vertical size.

PRINTERBITMAPJUSTIFY=x
Set x to LEFT, CENTER, or RIGHT.