how to restrict operator call for some extensions

[2000ips]

Dear sir

please advise in mat works how to disable operator call (90) for some of the extension phones. We are using nec ips 2000 system here.
I have gone through the command 1204 de ext no. and diable the feature to the some of the extenions. but they are not disable and able to call the operator (90). please help to control some of the extensions not to call the operator number (90)

thanks in advance

 

[OzzieGeorge]

Are all the extension that you want to restrict in the same tennant and do you want to restrict all extensions in that tennant?

 

[2000ips]

yes I want to restrict some of the extensions in the same tennat.
please advise

thanks for reply

 

[OzzieGeorge]

In that case the answer is sorry it can't be done!

You can restrict an entire tenant but you can't restrict individual extensions!

 

[2000ips]

thank you ozziegeorge for the reply given to me. But previously we were configured 90 enabled for operator for some of the extensions and we were disable 90 for some of the extensions using command 1204 de ext no.de 01 (enabled) and 02 (disabled) Now the problem arises..

 

[OzzieGeorge]

Your use of the term "for some of the extensions" is confusing the issue.

I'm assuming that all extensions that were set to 01 in command 1204 can get the operator and that all extensions set to 02 in command 1204 shouldn't be able to get the operator but can!

This is controlled by command 62Y where Y = the group number of your operator group (probably 0) second data = tenant number and in this case we are interested in tenant 02. This should be set to 1 (tennant 01 should be set to 0)

 

[2000ips]

thanks a lot for the guidance