How to restore an Exchange 2000 Server?

[gwichman]

Below is the output of a restore attempt. This is someone else's tape and i'm not sure what the "SG1DB1BRZ(NJMB03)" portion refers to in the object name. The first portion of "SG1(NJMB03)" should be the storage group. Is the later the mailbox name? If so, why might i get this error? I have dismounted the mailbox (database) and renamed it. I'm at a loss.. appreciate any help.

14:39:07 1/28/2003: Restore Started

14:39:17 (10.xxx) Restore job id 10 will require 1 image.
14:39:17 (10.xxx) Media id NY3088 is needed for the restore.

14:39:20 (10.001) Restoring from image created 01/08/2003 06:14:29 PM
14:39:22 (10.001) INF - Waiting for positioning of media id NY3088 on server ps-ps-1550-05.
14:39:46 (10.001) INF - Beginning restore from server ps-ps-1550-05 to client ps-ps-cubix-05.
14:39:47 (10.001) TAR - Microsoft Information Store:\SG1(NJMB03)14:39:47 (10.001) TAR - Microsoft Information Store:\SG1(NJMB03)\SG1DB1BRZ(NJMB03)
14:39:47 (10.001) (10.001) WRN - error writing Exchange 2000 object: Microsoft Information Store:\SG1(NJMB03)\SG1DB1BRZ(NJMB03) (0xFFFFFE05:FS_ACCESS_DENIED)
14:43:25 (10.001) TAR - Microsoft Information Store:\SG1(NJMB03)\Log files_1042078469
14:43:27 (10.001) (10.001) WRN - error writing Exchange 2000 object: Microsoft Information Store:\SG1(NJMB03)\Log files_1042078469 (0xFFFFFEB1:FS_DONT_WANT_STREAM)
14:43:27 (10.001) (10.001) INF - There are no jobs remaining for this restore request. Exchange 2000 database recovery will be performed.
14:43:37 (10.001) (10.001) INF - TAR EXITING WITH STATUS = 0
14:43:37 (10.001) (10.001) INF - TAR RESTORED 1 OF 3 FILES SUCCESSFULLY
14:43:37 (10.001) (10.001) INF - TAR KEPT 0 EXISTING FILES
14:43:37 (10.001) (10.001) INF - TAR PARTIALLY RESTORED 2 FILES

14:43:38 INF - Server status = 1
14:43:38 (10.001) Status of restore from image created 01/08/2003 06:14:29 PM = the requested operation was partially successful

14:43:38 (10.xxx) INF - Status = the requested operation was partially successful.

 

[gwichman]

think i figured it out.. had to check some options thanks to the veritas knowledge base.. had to allow database overwrite due to restore. Also has to allow send/receive permission for the logged in account. seems to be restoring now

 

[unknownone]

Is this the sgmon output? Where is the restore job log and what does it say?