Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to remove and add secondary CIL output 1

Status
Not open for further replies.

IONCP

Technical User
Nov 20, 2016
21
BN
Hi,

below is the current printout for IODDP, IOFDP, IOIFP,IONCP, CLINP, i'm trying to remove SMDR-2 , and add again , the current setup for SMDR-1 is going to Call Billing system , and SMDR-2 is going out via Serial port to Winfiol collecting call Log as backup. now it's not working, and i wanted to set this SMDR-2 throwing data to a new PC , anyone know what are the actual step and command ?

I have extra license for SMDR-ETH-Interface , let me know if it's possible to throw the SMDR to the free port.

Thanks in advance

<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-1-00 - - IN SERVICE
SYSN SYSDISK1 001-1-00-0 MASTER SILICON IN SERVICE
SYSSUBFS11
SYSSUBFS21
TM-SF
SYSN SYSTERMINAL 001-1-00-1 - MML - 7
SYSN SMDR-2 001-1-00-2 - OUT IN SERVICE
SYSN OAS-2 001-1-00-4 - NETWORK/OUT IN SERVICE
SYSN TELNET1 001-1-00-4 - NETWORK/MML - 7
SYSN TELNET12 001-1-00-4 - NETWORK/MML - 7
FCS - 002-1-00 - - IN SERVICE
FCS VMS 002-1-00-1 - OUT IN SERVICE
FCS WFX 002-1-00-3 - OUT IN SERVICE
FCS SMDR-1 002-1-00-4 - NETWORK/OUT IN SERVICE
FCS CICO 002-1-00-4 - NETWORK/MML - 7
ECARE - 003-1-00 - - IN SERVICE
ECARE OAS-1 003-1-00-4 - NETWORK/OUT IN SERVICE
ECARE TELNET31 003-1-00-4 - NETWORK/MML - 7
END


IOFDP;
<IOFDP;
I/O FUNCTIONS DEFINITION
IODEV TRD NDC CALLS WAIT DELAY SUPER
SYSTERMINAL BOTH 2 30 5 YES
VMS BOTH 2 30 5 YES
SMDR-2 BOTH 2 30 5 YES
WFX BOTH 2 30 5 YES
END


<IOIFP;
I/O INTERFACE CHARACTERISTICS
IODEV IFACE BAUDR WORDL PARITY STPBIT PROC
SYSTERMINAL V24 ALL 8 NONE 1 ECHO
VMS V24 9600 8 NONE 1 ECHO
SMDR-2 V24 9600 8 NONE 1 ECHO
WFX V24 9600 8 NONE 1 ECHO
END


<IONCP;
NETWORKING CONNECTION
NODE/IODEV LIM USER TYPE/CON IP PORT PROC
SYSN 1
OAS-2 CSTA SERVER/1 172.16.28.11 5000 TCP
FCS 2
SMDR-1 CIL-1 CLIENT 172.16.28.100 9001 TCP
ECARE 3
OAS-1 CSTA SERVER/1 172.16.28.14 5000 TCP
END

<IONPP;
NETWORK PORT CONFIGURATION DATA
EQU IP GATE MASK ETHERNET
001-1-00-4 172.16.28.11 172.16.25.180 255.255.248.0 00.1E.DF.63.DD.97
002-1-00-4 172.16.28.12 172.16.25.180 255.255.248.0 00.13.5E.F0.92.9E
003-1-00-4 172.16.28.14 172.16.25.180 255.255.248.0 00.1E.DF.63.DB.D5
END

<CLINP;
CALL LOGGING DATA
CALL LOGGING MODE: ACTIVATED
MOBILITY LOGGING MODE: NOT ACTIVATED
HEADER FORM DMPSIZ DISCR IN SERVICE LOGABN LOGFAL HRTBT
SMDR02 2 1 0 YES NO 0 NO
ORIG DIAL TIME
ALL ALL ALL
DIR LIM BPOS EVENT

HEADER FORM DMPSIZ DISCR IN SERVICE LOGABN LOGFAL HRTBT
SMDR01 2 1 0 YES NO 0 NO
ORIG DIAL TIME
ALL 9 ALL
ALL 29 ALL
ALL 27 ALL
ALL 25 ALL
DIR LIM BPOS EVENT


END

 
Dear inlsp05

Sincerely appreciate your respond.

Base on my print out , do you think I can remove the current smdr02 output from v23 to ethernet as i have extra license to the system.

Will it affect the smdr01 output to hotel call billing system ?

Thanks in advance
 
hi
if your v24 is in smdr-2 you can end that with this command and no affect to other cil oupput.
ioeqe:iodev=SMDR-2 ;
and for create again :
CLDFP; For checking Ready/Start Status
IOIFP; For printing boud port rate.
CLINP;
FIDAP:pATH=/SYSN/USR1/CILDATA,OPT=ALL; For See files in directory.
ASPAC:pARNUM=122,PARVAL=1;
ASPAC:pARNUM=97,PARVAL=15;
IoDDp;
IOEQI:IODEV=smdr-2,EQU= 001-1-00-2 ,USAGE=OUT; The Default Path for Storage File is SYSN/USR1/ACS/CIL

 
Hi,

Thanks for your kind reply,

i've try the command to end but below are the error

<IOEQE:IODEV=SMDR-2;
NOT ACCEPTED
IODEV ASSIGNED TO USER

do i have to remove the assigned user ?


<CLDFP;
FILE ADMINISTRATION DATA
FILE STATE
SMDR02 ACT
IODEV/PATH USER DEVICE STATE PRIORITY
SMDR-2 NONE PASSIVE C
FILE STATE
SMDR01 ACT
IODEV/PATH USER DEVICE STATE PRIORITY
SMDR-1 CIL-1 READY/STARTED A
END

thanks in advance.


 
Dear inlsp

below are the alarm that i get everytime


END

<allop;
ALARM LOG
IDENTITY: EMPIRE-HOTEL
VERSION: CXP1010125/4/TSWSP06/R7D

DATE: 22NOV16 TIME: 00:59:47
CLASS: 3
278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
22NOV16 00:57:54 5 1 CLOP 003-*-**-** 2

CLASS: 2
344 CIL, FAULTY CONNECTION TO NIU PORT
DATE TIME ALP NOIF EQU BRDID INF1
22NOV16 00:55:28 1 1 001-1-00-02 106 255

324 FAULTY TMU BOARD
DATE TIME ALP NOIF EQU BRDID INF1
22NOV16 00:58:25 6 1 005-1-30-00 102 1

CLASS: 1
345 INFORMATION COMPUTER, FAULTY COMMUNICATION CHANNEL
DATE TIME ALP NOIF EQU
22NOV16 00:55:52 3 1 002-*-**-**

CLASS: 0
344 CIL, FAULTY CONNECTION TO NIU PORT
DATE TIME ALP NOIF EQU BRDID INF1
22NOV16 00:55:29 2 1 002-1-00-04 106 1
RDATE RTIME
22NOV16 00:56:39
278 CIL DATA LOST FOR ONE OR MORE OUTPUT UNITS
DATE TIME ALP NOIF UNIT EQU INF1
22NOV16 00:57:47 4 1 CLOP 001-*-**-** 2
RDATE RTIME
22NOV16 00:57:47

LAST ALREI: 22NOV16, 00:55:28
 
this is not config error you must check conection between niu& pc
about tmu try end with cnboe:bpos=5-1-30; and if equ busy show try rfboi:bpos=5-1-30; and again cnboe
 
Hi

I manage to get smdr-02 in service but i couldn't get the cil print Ou from winfiol terminal 3 . It become out of service again after a while. I'm wondering how the previous engineer program the smdr02. And for your info the customer technical team that already resign removed and shut down both DNA server and winfax.

Would you advise to remove the DNA and winfax services ?

If yes what are the step.

Thanks in advance
 
Hi again

Would like to know how to change the smdr loving user and password ?

When I'm connected I try to type in msi see Pe: help it prompt error

Is here anyway to reset it??

Thanks in advance
 
Sorry typo

Loving user lol , well I mean is there anyway to edit or remove the current smdr 2 login from winfiol ? I get connected but login error

If I use other authentication, the smdr for internal and external does not run at winfiol 2nd # channel

Purpose of 2nd channel is use for cil backup, in case there is a complain from individual analogue extension that there are pesky human disturbing His/her extension then we will refer from this 2nd #

Hope to receive your advise

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top