How to remove a member from the MGC list

[bpitt]

How can one remove a member from the MGC list on a G430 without wiping out the whole list? I only need to remove 2 and keep 2.
Thanks.
Barry

 

[telm59]

I dont think you can or should.
clear mgc list
set mgc list

 

[SloTCMS30]

telm59 is correct

It is best to clear and set mgc list. However, if you have setup snmp on your gateways, you can use the graphical interface to set MGC's.

“Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for.”

- Epicurus

 

[snowman50]

Hopefully not to late with this info

Showing the current MGC list
To show the current MGC list, use the show mgc list command. This command shows the
IP addresses of the MGCs on the MGC list. It also shows whether or not SLS is enabled.

Removing one or more MGCs

To remove one or more MGCs from the MGC list, use the clear mgc list command.
Type the IP address of the MGC you want to remove as an argument to remove that MGC.
You can remove more than one MGC with one command by typing the IP addresses of all the MGCs you want to remove, separated by commas. To remove all the MGCs on the list, enter clear mgc
list with no arguments.

Changing the MGC list
1. Enter clear mgc list with no arguments to clear the MGC list.
2. Enter set mgc list with a different set of IP addresses.
Note:
Note: If you use the set mgc list command without first clearing the MGC list, the
G250/G350 simply adds the new MGCs to the end of the MGC list.