Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to recover from a RAID 1
- Thread starter pauvre
- Start date
-
1
- #2
- Thread starter
- #3
ok, I understand...
Well, it depends on the brand of the RAID. Ussualy, if a disk drive is fault, ou just need to replace it, how to do it? again, it depends on the hardware, if it is hot swap, you can replace it online and (normally) the hardware RAID will rebuild all data.
You *must* read the hardware documentation. Some RAID controllers need to rebuild data manually, others are automatically.
Cheers.
Well, it depends on the brand of the RAID. Ussualy, if a disk drive is fault, ou just need to replace it, how to do it? again, it depends on the hardware, if it is hot swap, you can replace it online and (normally) the hardware RAID will rebuild all data.
You *must* read the hardware documentation. Some RAID controllers need to rebuild data manually, others are automatically.
Cheers.
- Thread starter
- #5
- Status
