Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to programme an E1 on hipath 4000 Diun2
- Thread starter Principe
- Start date
AbdulRashid
Technical User
do you know BUEND,TDCSU,RICHT,LDAT,LDPLN ???
if not then I have to inform you all that AMO.
othervise only TDCSU.
if not then I have to inform you all that AMO.
othervise only TDCSU.
do as below r call me 00966502828214
ADD-COSSU:,100,,,,,,,,"COS FOR E1";
CHA-COSSU:COS,100,TA&TNOTCR&CDRC&COSXCD&MB&CFNR&VCE&SPKR;
CHA-COSSU:COS,100,FWDNWK&TTT&OVCAT&CFB&FWDDIR&CFSWF&FWDECA&FWDEXT;
CHA-COSSU:COS,100,CW;
ADD-COP:100,L3AR,,;
CHANGE-COP:100,COPADD,,,,INDEP,"COP FOR E1";
ADD-COT:100,RCL&XFER&ANS&CEBC&TIE&CBBN&CBFN&BLOC&LWNC&NLCR&TSCS&DFNN&CFVA&NTON;
CHANGE-COT:100,COTADD,,INDEP,"COT FOR E1";
ADD-LODR:100,,,,ECHO,1;
ADD-LODR:100,,,,ECHO,2;
ADD-LODR:100,,,,END;
ADD-LODR:100,,,"LODR FOR E1";
ADD-BUEND:101," OSO network ",30,0,*,2,ON,0,0,NEUTRAL;
ADD-TDCSU:NEW,1-01-025-0,100,100,0,0,100,1,1,"oso",101,ECMAV2,8,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,31,MANY,1-1-101,0,1,1,EMPTY,100,1,N,,,,,,16,8,1,10,,EC&G711&G729AOPT,"",101,CIR,Y,TRADITIO,S2CONN,1&&30,N,1,0,0,0,0,0,0;
ADD-RICHT:LRTENEW,101,VCE,"E1-OSO ",101,1-10-101,YES,,FIX,,"",PP300,,,,,NO,NO,"",0,NEUTRAL,NO,NO,NO,NO,NO,NO,NO,NO;
ADD-LDAT:101,VCE,1,,101,100,64,,1,EMPTY,NONE,1-20-101,4,,,,,,,,,,,,;
ADD-WABE TIE CODE
ADD-LDPLN AS PER THE REMOTE EXTNS
HIPATH 4000 KEPT AS MASTER
select the OSO as slave
ADD-COSSU:,100,,,,,,,,"COS FOR E1";
CHA-COSSU:COS,100,TA&TNOTCR&CDRC&COSXCD&MB&CFNR&VCE&SPKR;
CHA-COSSU:COS,100,FWDNWK&TTT&OVCAT&CFB&FWDDIR&CFSWF&FWDECA&FWDEXT;
CHA-COSSU:COS,100,CW;
ADD-COP:100,L3AR,,;
CHANGE-COP:100,COPADD,,,,INDEP,"COP FOR E1";
ADD-COT:100,RCL&XFER&ANS&CEBC&TIE&CBBN&CBFN&BLOC&LWNC&NLCR&TSCS&DFNN&CFVA&NTON;
CHANGE-COT:100,COTADD,,INDEP,"COT FOR E1";
ADD-LODR:100,,,,ECHO,1;
ADD-LODR:100,,,,ECHO,2;
ADD-LODR:100,,,,END;
ADD-LODR:100,,,"LODR FOR E1";
ADD-BUEND:101," OSO network ",30,0,*,2,ON,0,0,NEUTRAL;
ADD-TDCSU:NEW,1-01-025-0,100,100,0,0,100,1,1,"oso",101,ECMAV2,8,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,31,MANY,1-1-101,0,1,1,EMPTY,100,1,N,,,,,,16,8,1,10,,EC&G711&G729AOPT,"",101,CIR,Y,TRADITIO,S2CONN,1&&30,N,1,0,0,0,0,0,0;
ADD-RICHT:LRTENEW,101,VCE,"E1-OSO ",101,1-10-101,YES,,FIX,,"",PP300,,,,,NO,NO,"",0,NEUTRAL,NO,NO,NO,NO,NO,NO,NO,NO;
ADD-LDAT:101,VCE,1,,101,100,64,,1,EMPTY,NONE,1-20-101,4,,,,,,,,,,,,;
ADD-WABE TIE CODE
ADD-LDPLN AS PER THE REMOTE EXTNS
HIPATH 4000 KEPT AS MASTER
select the OSO as slave
- Thread starter
- #4
- Status