Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to program a new area code?? Opt 11c
- Thread starter Diny
- Start date
Ignore that message
In Ld 90
REQ prt
Cust: 0
FEAT: NET
TRAN: AC1
TYPE: NPA
NPA (enter 1plus the other area code that is working)
Take note of the RLI that is programmed for the area code you just printed.
REQ: NEW
CUST: 0
FEAT: NET
TRAN: AC1
TYPE: NPA
NPA 1939
RLI: (enter the same RLI number as the one printed)
<cr> the rest of the way or at the SDRR prompt type DENY and then at the DENY prompt enter prefix (xxx) numbers that you would not want your users to call like 976
<cr> the rest of the way
In Ld 90
REQ prt
Cust: 0
FEAT: NET
TRAN: AC1
TYPE: NPA
NPA (enter 1plus the other area code that is working)
Take note of the RLI that is programmed for the area code you just printed.
REQ: NEW
CUST: 0
FEAT: NET
TRAN: AC1
TYPE: NPA
NPA 1939
RLI: (enter the same RLI number as the one printed)
<cr> the rest of the way or at the SDRR prompt type DENY and then at the DENY prompt enter prefix (xxx) numbers that you would not want your users to call like 976
<cr> the rest of the way
- Status
Similar threads
- Locked
- Question
- Locked
- Question