HOW TO program a DGRP

[technodrew]

Where can this be done>? THanks

 

[johnpoole]

you can print dig in ld 20, to build a new one just add it to a set..

key 8 dig 21 05 v

that would build dig 21 as a voice (auto-answer) intercom. an r would denote ring, all members of a dig have to be the same, either all voice or all ring.. you don't need a command to add the dgrp itseld

john poole
bellsouth business
columbia,sc

 

[technodrew]

I need to add a whole group in the sys.

 

[acewarlock]

Do as johnpoole said and do a print of the exisiting DGRP and you will be able to see which ones are being used. Pick an unused number and qreat a new group

 

[johnpoole]

if i print dig 44 and get no act no date, so if i add dig 44 01 r to a key, i have a new dig with one member

john poole
bellsouth business
columbia,sc

 

[acewarlock]

You may not be able to use the 1 if it is also your SPRE code, so if you try and get an SCHxxxx just start with a 2.