Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Print SPRE codes? 2

Status
Not open for further replies.

Jumpermonkey

Technical User
Sep 28, 2003
45
0
0
US
Can anyone shed some light on how to get a print of existing SPRE codes? I know about the LD 15 prt showing the SPRE itself, but can I print all of the feature specific codes which follow the SPRE?
I also know about LD 57 and the FFC's.

Thank you for your help!

JumperMonkey
 
Here's my cheat sheet:

SPRE Function 500 Set (if applicable)
1 Activate Ring Again
2 Cancel Ring Again
3 Group Ringing Number Pickup
4 Trunk Answer From any Station (TAWAS)
5 Charge Account Number
6 Authorization Code Entry
70 Trunk Verification Access
71 Call Park
72 Call Park Retrieve
73 Dial System Speed Call
74 Call Forward
75 System Speed Call List Access 500 Sets dial #2
76 User Speed Call List Access 500 Sets dial #3
77 Permanent Hold 500 Sets dial #4
78 Store Number
79 Recall Stored Number
80 Priority AUTOVON
81 Automatic Set Relocation
82 Flash Override AUTOVON
83 Malicious Call Trace
84 IS Access
84 User Status
85 Flash AUTOVON
86 Room Status
87 Disconnect AO6 Party
88 Immediate AUTOVON
89 Last Number Redial
91 Maintenance Set Login
92 Terminal Diagnostics - Used with LD 31
93 Invoke Conference Test - Used with LD 88
94 Group Ringing Number Pickup - Other Group
95 DN Pickup


--
Fletch
Visit the Nortel Technical Support Portal at:
 
And to answer the original question. This is not printed out of the switch, it is actually burried in the NTP's. One of those golden treasures you have to hunt a bit for.

--
Fletch
Visit the Nortel Technical Support Portal at:
 
So, are the SPRE codes changeble?
It seems that if you cannot print them, they are fixed.
Am I correct?

Man, I love this switch!!

JumperMonkey

Thanks to all who replied!!
 
ld 21
TYPE FTR_DATA
CUST 00
TBL
**DAPC**PREFIX TABLE NO: 00 **
UNKN**INTL**NATL**ESPN**LOCL**ELOC**ECDP**
UNKN*
E164* 00 0
PRIV*
E163* 00 0
TELX*
X121*
NATL*

OPT AHD BIND BIXA BLA CFF CFRA
COX CPA CTA DBA DNX DSX
HTU HVD XBL IC1 IDP XLF
IHD ITG FKA LOD LRA MCI
MWUD PVCD REA RND
RTR RTD ROX SBA SYA
TTAD VOBD CWRD HLPD HRLD
CXOD
DGRP 200
IRNG NO
PKND 2
SPRE 1111
PREO

change it in 15.. and the table only works if you set up the ffc to match it.. spre default is 1, i changed this one so it would not block 1000 numbers

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top