How to print ranges of DSC TSC & LSC in ranges LD 87?

[Beauty1982]

Hi folks:

I have an issue, I need to print TSC, DSC & LSC in LD 87, but I required only certain ranges, printing all the DSC, TSC or LSC doesn't work for me, because my system is getting some problems and log me out every certain time, and all the information is trunked.

I really need your help.

Friendly regars

 

[bigindian65]

don't believe you can pick a range, just a individual code or all

Mato' Was'aka

 

[GHTROUT]

If you turn on Multi-User, speed of printing is often improved

Check here:

LD 22
REQ PRT
TYPE OVLY

Change in LD 15


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[Beauty1982]

Thanks folks for all your help.

I'll try to apply the changes; any other suggestion?

Regards

 

[bigindian65]

Get an emulation - procomm or reflections.

Mato' Was'aka

 

[Beauty1982]

how can I do an emulation with procomm?

 

[GHTROUT]

I think he means "get a terminal emulation program" - Procomm being an emulation program.

If you already use it, or even HyperTerm - your printing issue (where long narrow fast print jobs scramble) will probably be resolved by settings in the program (turn off compression, turn on error control, etc) or by setting Multi-User ON


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[telebub]

That will also allow you to print all CDP entries to a capture file rather than to a printer and run the risk of the printer hosing you up in midstream.

War Eagle!!

 

[Beauty1982]

I really appreciate a lot your help, I'l work on it.