How to prevent users from dialing a phantom DN 3

[Phonetec226]

I'm working a a 81 C and what I like to do is the following: I have a hot d programmed on DN XXXX which goes to a Stinger Ringer for Delivery Services on DN XXXX. Because the Stinger is programmed on a Tn with it's own DN when someone calls the DN the stinger goes off even if no one is at the Delivery Entrance. Is there a way to prevent somebody from calling this DN and to be forwarded to an operator, while the DN that is forwarded to the stinger still makes the ringer work?

 

[trvlr1]

Change the number to one totally out of the range of your normal extensions. If you have 4 digit extensions, make it 7 digits if you can. The likelyhood of someone dialing that number is pretty remote.

 

[Firebird Scrambler]

As stated above and make sure it's not part of any DID range.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[hawks]

If you have the Multi Tenant option and these are the only 2 extensions then you could make them as Tenant 1. That way nobody else could call it.

 

[cmassjohn]

But you still want to make it work from the hot key...?


Senior Engineer, cmass

http://www.cmass-ni.com