Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to OUT a CDP and return the DNB's for use.

Status
Not open for further replies.
Nov 4, 2016
18
0
0
US
Starting a new thread as previous thread lead me to a new list of questions.
I have a CDP, 66 This used to be a tie to another pbx, but is no longer.
I need to open the entire range of 6600 - 6699 for use as DN's. (we purchased this whole block as DID's)

Could use some assistance in ensuring that i do not completely screw everything up :)

I've found other threads that discuss removing trunks, just not sure where to go from here.
 
Step 1..take a print of all CDP starting from 66.

Ld 20
Req prt
Type DN
CUST 0
DN 66 ####hit enter you will get a long list of all extensions CDP ..

STEP 2.. OUT DSCs you got above.

Ld 87
Req OUT
Cust 0
FEAT CDP
TYP DSC
DSC 6601 example
Hit enter ..you will again get
DSC 6602
DSC 6603
.
.
AS MANY AS YOU WANT..
 
When i go to ld 20, and try to prt the dn list. 66 shows as "no act since date
 
And when you try to print the LUDN what it shows ?
Ld 20
Req prt
Typ LUDN
DN 66
?
 
The reason LD 20 shows "no act since date" when doing a PRT on DN 66 is because nothing is programmed with 66XX.

As soon as you program up a new set with DN 66, you will see the full range available.

>ld 20
REQ: prt
TYPE: ludn
CUST 0
DN 66

CUSTOMER 00 - UNUSED DNS:
66
*****************
REQ: prt
TYPE: dnb
CUST 0
DN 66
DATE
PAGE
DES
SCH0881
NO ACT SINCE NO DATE
*************************

> ld 20

PT0000
REQ: prt
TYPE: dnb
CUST 0
DN 66
DATE
PAGE
DES

DN 6601
TYPE L500
TN 000 0 07 02 MARP DES 33 25 JUL 2017

NACT
REQ:
***************
REQ: prt
TYPE: ludn
CUST 0
DN 66

CUSTOMER 00 - UNUSED DNS:
6600 6602 6603 6604 6605 6606 6607 6608 6609 661
662 663 664 665 666 667 668 669


REQ:
****************
As you can see now, all the ranges starting with 66XX are now available to use.

 
the ranges did not exactly all show up. when i added 6601, it added the range of 01-10 i had to add each 10's range in order to get them to start showing up.
but the did! thank you for all your help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top