Does anyone out there know of a way to set up a Dell 1600n multifunction printer to work as a network scanner? I can load a document, then press Start Scan, then choose Network Scan on the display, but when it asks me to "Selece User ID", it beeps and says "ID List Empty". Any help would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to network scanning feature on Dell 1600n
- Thread starter cthrash
- Start date
The user id list should be populated once the scanner is set up on the PC. This is a how to from Dell that may help you :
nugihouser
MIS
You'll need a Dell utility called Dell Network Scan that you can input the IP address of the 1600n. There is where you will setup a user ID and password that will bind your PC and the 1600n together. The software should have came with your 1600n along with the paper port OCR software.
- Status
Similar threads
- Question
- Locked
- Question