Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to manual to program IPview (BCM 450) onto an HD TV and not wallboard.
- Thread starter John6969
- Start date
Firebird Scrambler
Systems Engineer
From your "HD TV", can you access your BCM system by browsing to it using the IP address. You need to log in and then select the IP view software by accessing the administrator programs tab.
Download the software and run it.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
Download the software and run it.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question