Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to intrude an external line??

Status
Not open for further replies.

user25

Technical User
Jan 6, 2008
39
DZ
Hi all!
I found in ALEX that's possible to make intrusion and forced the extenal line to be disconected
we have just to dial:
Dial *44*individual external line number# and external destination code (busy tone).
an press 4.. But after pressing 4 i always hear the busy tone
In my case The externa line belong to rou=41 whose category is:

rocap:rou=41;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
41 013000000000 4 2100030000 0 30 128 01151506 200000000000 001100

My extension category is:
<kscap:dir=1007;
KEY SYSTEM CATEGORY PRINT
DIR TRAF SERV CDIV ROC ITYPE TRM ADC
1007 03151515 00131207 011151000 0000 1 0 00000002011

Other extension have cat=2
<exccp:cat=2;
EXTENSION CATEGORY CODE
CAT TRAF SERV CDIV ROC
2 01020202 00021207 001151000 0000

Is there problem in category parameters??

Thank you for all!
 
hi user25,
check the command:
ASPAP:pARNUM=23; (suffix digit to requesting intrusion)
it's by default 8
then from dir 1007 try to Dial
* 0 * individual external line number # external destination code then when you get the busy tone press the suffix digit to intrusion (i.e 8).

good luck
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top