Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to install modem card in the pci slot using sco unix openserver ?
- Thread starter rafi2002
- Start date
That's a Digiboard and I'm quite confident it came with explicit instructions. If not, see
You can get the xr920 manual from
Generally, Digi products install from a green CD that you need to mount at a specific point that the included documentation is quite clear about.
If you don't have that CD, you can download everything you need from:
After installing their software, you run "mpi" to configure the kernel and the card.
Tony Lawrence
SCO Unix/Linux Resources tony@pcunix.com
You can get the xr920 manual from
Generally, Digi products install from a green CD that you need to mount at a specific point that the included documentation is quite clear about.
If you don't have that CD, you can download everything you need from:
After installing their software, you run "mpi" to configure the kernel and the card.
Tony Lawrence
SCO Unix/Linux Resources tony@pcunix.com
- Status
Similar threads
- Locked
- Question