how to install ipso.tgz (3.8) on an ip440?

[watdismins]

I am trying to install ipso 3.8 on an ip440 without the use of voyager. For some reason voyager is not working for me. I cannot even access the box with an ip address. I had a similar problem once with an ip330 and all I did was upgrade the ipso by installing it via ftp. I would like to install it using ftp via: bootmgr> install (similar to the ip330 method).
Furthermore, I am unable to access the bootmgr on the ip440, it takes me straight into boot. Does anyone know any way that I can install ipso.tgz on the ip440 without using voyager?

 

[wirelesspeap]

yes, use bootdisk.

IP440 does NOT have bootmanager.

 

[shaggerTM]

You don't need to use the bootdisk, in fact this is potentially a very awkward route.

You should be able to use the command prompt to do this in about 5 minutes.

Look at

http://www.nokiasecurity.com

and see if they can help you with your Nokia problems.



========================================
Find out about what I do for a living at

http://www.ascltd.co.uk

========================================