gabber4858
Technical User
Does anyone have a manual for an old CICS 6.0? I have a CICS 6.0 and a CP 100, but I don't know what ports to use to hook up the voicemail. Any suggestions on how to do this would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to install a CP 100 on a CICS 6.0
- Thread starter gabber4858
- Start date
- Status
misseditbythatmuch
Technical User
curlycord
Programmer
It depends on your software.
If restricted software (4X8) use pairs 7 and 8, for non restricted (8X16) use 15 and 16, for fully expanded (8X24) use 23 and 24.
You can use any ports but this is the standard most use...keeping extras at the end and phones at beginning.
=----(((((((((()----=
curlycord
If restricted software (4X8) use pairs 7 and 8, for non restricted (8X16) use 15 and 16, for fully expanded (8X24) use 23 and 24.
You can use any ports but this is the standard most use...keeping extras at the end and phones at beginning.
=----(((((((((()----=
curlycord
- Status
Similar threads
- Locked
- Question