how to install 25.40b s/w into my nortel system

[abinsasi]

i will try these option but i cant so please help me wat i do the next
also i get an error message
Error: Couldn't find module size file : a:/p/data/module.siz
from option 4 new installation from flash

SOFTWARE INSTALLATION PROGRAM
************************************
Verify
Security ID: 10232075
************************************

Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 0x20314588 (tRptD): (20/8/09 9:59:41.854) PCH0313 Error initi
alizing patch retention file
Make sure the disk is ok. Reten info may be out of date


Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection :

Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 4

Error: Couldn't find module size file : a:/p/data/module.siz

Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 3

Utilities Menu :
1. Restore Backed Up Database
2. Archive Database Utilities
3. Install Archived Database
4. Review Upgrade Information
5. Clear Upgrade Information
6. Undo Installation
7. Flash Boot ROM Utilities
8. Current Installation Summary
9. Change 3900 series set languages.
10. IP FPGA Utilities
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : 7

Flash Boot ROM Utilities Menu :
1. List Flash Boot ROM
2. Upgrade Flash Boot ROM
3. Restore Flash Boot ROM
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : q
Are you sure? (y/n/[a]bort) : y


Can't open or create "c:/u/db/iprem.db"
Can't open or create "c:/u/db/surv.db"
Unable to open /p/data/VERSION


Meridian 1 X11 System Software
Release : x112540
Created : Monday January 14 11:47:31 EST 2002
Loaded : 20/8/09 10:04:37

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.


BUG7436 OS 0: WARNING "Bad Reason Data"

0x20314588 (tRptD): (20/8/09 10:04:36.111) BUG6247 EvtColl: AAL file access err
or.
Start SNMP agent
Can not obtain local IP address --
0x20314588 (tRptD): (20/8/09 10:04:36.113) BUG6247 EvtColl: AAL file access err
or.
RPT: RPT Fd sub-system already intialized
RPT: RPT Alarm sub-system already intialized
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

0x20315c68 (tRptD): (20/8/09 10:04:37.117) SRPT789 RST 0: Exception-caused task
restart: TID=0x203373b8, vec=0x2, pc=0x10f295d0
0x20315c68 (tRptD): (20/8/09 10:04:37.117) SRPT789 RST 0: Exception-caused task
restart: TID=0x203373b8, vec=0x2, pc=0x10f295d0
Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"

0x20315c68 (tRptD): (20/8/09 10:04:37.119) SRPT786 RST 0: Task tStartup being r
estarted
0x20315c68 (tRptD): (20/8/09 10:04:37.119) SRPT786 RST 0: Task tStartup being r
estarted
PDT: Unable to create macro library device.
PDT: Login server already initialized.
PDT: Login initialization error.
PDT: Shell Control subsystem already initialized.
PDT: Shell Control initialization error.
PDT: PDT COLD Initialization failed.
exchEnableHook: previously set _func_excBaseHook = 0x1009fd6a
0x20315c68 (tRptD): (20/8/09 10:04:39.795) RPT0003 Unknown report (not in DB):
cat# = 10, report# = 7499
0x20315c68 (tRptD): (20/8/09 10:04:41.708) SRPT730 OS 0: Cold Start
Release: x112540
Created: Monday January 14 11:47:31 EST 2002
0x20315c68 (tRptD): (20/8/09 10:04:41.785) PCH0313 Error initializing patch ret
ention file
Make sure the disk is ok. Reten info may be out of date
Can't open or create "c:/u/db/iprem.db"
Can't open or create "c:/u/db/surv.db"
Unable to open /p/data/VERSION


Meridian 1 X11 System Software
Release : x112540
Created : Monday January 14 11:47:31 EST 2002
Loaded : 20/8/09 10:04:52

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.


BUG7436 OS 0: WARNING "Bad Reason Data"

Error: failed to bind server address
Start SNMP agent
Can not obtain local IP address --
RPT: RPT Fd sub-system already intialized
RPT: RPT Alarm sub-system already intialized
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"

0x20315c68 (tRptD): (20/8/09 10:04:52.175) BUG6247 EvtColl: AAL file access err
or.
0x20315c68 (tRptD): (20/8/09 10:04:52.176) BUG6247 EvtColl: AAL file access err
or.
PDT: Unable to create macro library device.
PDT: Login server already initialized.
PDT: Login initialization error.
PDT: Shell Control subsystem already initialized.
PDT: Shell Control initialization error.
PDT: PDT COLD Initialization failed.
exchEnableHook: previously set _func_excBaseHook = 0x1009fd6a
0x20315c68 (tRptD): (20/8/09 10:04:52.177) BERR705 EXC 0: Bus Error in Task "tS
tartup" (0x203373b8)
SR=0x3004, PC=0x10f295d0, Addr=0x0, SSW=0x505
0x20315c68 (tRptD): (20/8/09 10:04:52.179) SRPT789 RST 0: Exception-caused task
restart: TID=0x203373b8, vec=0x2, pc=0x10f295d0
0x20315c68 (tRptD): (20/8/09 10:04:52.179) SRPT789 RST 0: Exception-caused task
restart: TID=0x203373b8, vec=0x2, pc=0x10f295d0
0x20315c68 (tRptD): (20/8/09 10:04:52.182) SRPT786 RST 0: Task tStartup being r
estarted
0x20315c68 (tRptD): (20/8/09 10:04:52.182) SRPT786 RST 0: Task tStartup being r
estarted
Can't open or create "c:/u/db/iprem.db"
Can't open or create "c:/u/db/surv.db"
Unable to open /p/data/VERSION


Meridian 1 X11 System Software
Release : x112540
Created : Monday January 14 11:47:31 EST 2002
Loaded : 20/8/09 10:05:07

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.


BUG7436 OS 0: WARNING "Bad Reason Data"

Error: failed to bind server address
Start SNMP agent
Can not obtain local IP address --
0x20315c68 (tRptD): (20/8/09 10:04:54.856) RPT0003 Unknown report (not in DB):
cat# = 10, report# = 7499
0x20315c68 (tRptD): (20/8/09 10:04:56.773) SRPT730 OS 0: Cold Start
Release: x112540
Created: Monday January 14 11:47:31 EST 2002
RPT: RPT Fd sub-system already intialized
RPT: RPT Alarm sub-system already intialized
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

0x20315c68 (tRptD): (20/8/09 10:04:56.850) PCH0313 Error initializing patch ret
ention file
Make sure the disk is ok. Reten info may be out of date
Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"

PDT: Unable to create macro library device.
PDT: Login server already initialized.
PDT: Login initialization error.
PDT: Shell Control subsystem already initialized.
PDT: Shell Control initialization error.
PDT: PDT COLD Initialization failed.
exchEnableHook: previously set _func_excBaseHook = 0x1009fd6a
0x20315c68 (tRptD): (20/8/09 10:05:07.240) BUG6247 EvtColl: AAL file access err
or.
0x20315c68 (tRptD): (20/8/09 10:05:07.242) BUG6247 EvtColl: AAL file access err
or.
Can't open or create "c:/u/db/iprem.db"
Can't open or create "c:/u/db/surv.db"
Unable to open /p/data/VERSION
0x20315c68 (tRptD): (20/8/09 10:05:07.244) BERR705 EXC 0: Bus Error in Task "tS
tartup" (0x203373b8)
SR=0x3004, PC=0x10f295d0, Addr=0x0, SSW=0x505


Meridian 1 X11 System Software
Release : x112540
Created : Monday January 14 11:47:31 EST 2002
Loaded : 20/8/09 10:05:22

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.


BUG7436 OS 0: WARNING "Bad Reason Data"

Error: failed to bind server address
Start SNMP agent
Can not obtain local IP address --
0x20315c68 (tRptD): (20/8/09 10:05:07.245) SRPT789 RST 0: Exception-caused task
restart: TID=0x203373b8, vec=0x2, pc=0x10f295d0
0x20315c68 (tRptD): (20/8/09 10:05:07.245) SRPT789 RST 0: Exception-caused task
restart: TID=0x203373b8, vec=0x2, pc=0x10f295d0
RPT: RPT Fd sub-system already intialized
RPT: RPT Alarm sub-system already intialized
RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

0x20315c68 (tRptD): (20/8/09 10:05:07.248) SRPT786 RST 0: Task tStartup being r
estarted
i0x20315c68 (tRptD): (20/8/09 10:05:07.248) SRPT786 RST 0: Task tStartup being
restarted
Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"

0x20315c68 (tRptD): (20/8/09 10:05:09.922) RPT0003 Unknown report (not in DB):
cat# = 10, report# = 7499
PDT: Unable to create macro library device.
PDT: Login server already initialized.
PDT: Login initialization error.
PDT: Shell Control subsystem already initialized.
PDT: Shell Control initialization error.
PDT: PDT COLD Initialization failed.
exchEnableHook: previously set _func_excBaseHook = 0x1009fd6a
0x20315c68 (tRptD): (20/8/09 10:05:11.839) SRPT730 OS 0: Cold Start
Release: x112540
Created: Monday January 14 11:47:31 EST 2002
0x20315c68 (tRptD): (20/8/09 10:05:11.916) PCH0313 Error initializing patch ret
ention file
Make sure the disk is ok. Reten info may be out of date


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540
Created : Monday January 14 11:47:31 EST 2002
Loaded : 20/8/09 10:05:26
Last Restart: 20/8/09 10:05:26
Current Time: 20/8/09 10:05:47

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

^IBUG6343: Unable to initialize drive. pDrv = 0x200a725c, task = tStartup, tid =
0x203373b8 , pc = 0x10146d7c
BUG6343: Unable to initialize drive. pDrv = 0x200a725c, task = tStartup,
tid = 0x203373b8 , pc = 0x10146dae

BUG7436 OS 0: WARNING "Bad Reason Data"

RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
Couldn't open loadware patch file "c:/u/loadware/reten/loadware.pch"
Can't open or create "c:/u/db/iprem.db"
Can't open or create "c:/u/db/surv.db"
Unable to open /p/data/VERSION


Meridian 1 X11 System Software
Release : x112540
Created : Monday January 14 11:47:31 EST 2002
Loaded : 20/8/09 10:05:26
Last Restart: 20/8/09 10:05:54
Current Time: 20/8/09 10:06:01

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.


BUG7436 OS 0: WARNING "Bad Reason Data"

0x20314588 (tRptD): (20/8/09 10:05:22.306) BUG6247 EvtColl: AAL file access err
or.
logTask: 72949 log messages lost.
Start SNMP agent
Can not obtain local IP address --
0x20314588 (tRptD): (20/8/09 10:05:22.307) BUG6247 EvtColl: AAL file access err
or.


System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r09 dev2.54
Reset Reason: C0, 0 - Reset due to Power Up
SRAM: 128 kBytes
DRAM: 16 MBytes, speed=60 ns
Security ID: 10232075 type: NT_STD
System ID: 10232075
Backup Flash: 1572 kBytes
Program Store: 32 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:00:75:44:8E:24
PCMCIA card installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
CONTROL-I entered. Invoking install setup program from SW Delivery Card.
DRAMOS load from SW Delivery Card failed.
Verifying Diskos.


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540
Created : Monday January 14 11:47:31 EST 2002
Loaded : 20/8/09 10:07:07

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

BUG6343: Unable to initialize drive. pDrv = 0x200a725c, task = tStartup, tid = 0
x203373b8 , pc = 0x10146d7c
BUG6343: Unable to initialize drive. pDrv = 0x200a725c, task = tStartup,
tid = 0x203373b8 , pc = 0x10146dae

BUG7436 OS 0: WARNING "Bad Reason Data"

RPT: can't create log file c:/u/rpt/rpt.log (errno 0xd0001)
Unable to find startup script.
PCH1309: Error creating patch retention file "c:/u/patch/reten/reten.pch"
PCH1201: Error initializing patch retention.
Patch retention will not be possible.

BUG7462 OS 0: WARNING "Patch Init"

0x20314588 (tRptD): (20/8/09 10:07:12.854) RPT0003 Unknown report (not in DB):
cat# = 10, report# = 7499
Unable to create directory "c:/u/loadware/"
PCH0702: Unable to initialize loadware patch file.

BUG7462 OS 0: WARNING "Patch Init"

0x20314588 (tRptD): (20/8/09 10:07:14.776) SRPT730 OS 0: Cold Start
Release: x112540
Created: Monday January 14 11:47:31 EST 2002


SOFTWARE INSTALLATION PROGRAM
************************************
Verify
Security ID: 10232075
************************************

Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 0x20314588 (tRptD): (20/8/09 10:07:14.853) PCH0313 Error init
ializing patch retention file
Make sure the disk is ok. Reten info may be out of date
2

Select type of upgrade to be performed :
1. Option 11/11E to Option 11C
2. Option 11C New Software Upgrade
3. Option 11C Feature/Parameter Upgrade
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : p

Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 4

Error: Couldn't find module size file : a:/p/data/module.siz

Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 4

Error: Couldn't find module size file : a:/p/data/module.siz

Main Cabinet Software Installation Main Menu :
1. New Install or Option 11/11E Upgrade - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 3

Utilities Menu :
1. Restore Backed Up Database
2. Archive Database Utilities
3. Install Archived Database
4. Review Upgrade Information
5. Clear Upgrade Information
6. Undo Installation
7. Flash Boot ROM Utilities
8. Current Installation Summary
9. Change 3900 series set languages.
10. IP FPGA Utilities
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection :

 

[Firebird Scrambler]

First of all. your Option 11c system daughterboard is corrupted!. It will need the daughterboard formatting or replacing with another one that has 25.40 software installed (You can also get away with V25.40b software using the same keycodes!).

The reason is because you can't access the "C" drive which is on the daughterboard. Reference to the "A" drive os a PCMCIA card in slot "A" which has the correct software version. A copy of the customers database is still on the "Z" drive which is your CPU, so don't lose it!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Firebird Scrambler]

I have a guide on how to format the daughterboard & to restore the software, database for you. I'll try and enter some of it here, but you might want to try and contact me (without leaving your emil address here!) to obtain instructions for formatting the daughterboard.

The guide I did is quite old, but should help you in the right direction.


INFORMATION ON HOW TO RESTORE THE "C" DRIVE
ON A OPTION 11C

THIS DOCUMENT HAS BEEN WRITTEN TO ENABLE THE ON SITE SWITCH MAINTENANCE ENGINEER TO BE ABLE TO RESTORE A CUSTOMERS DATABASE ON A OPTION 11C THAT HAS GONE FAULTY, WITHOUT THE NEED TO ORDER ANY STORES. JUST USING A LAPTOP / PCMCIA CARD..
THIS WILL HELP TO PREVENT A LOT OF PROBLEMS THAT CURRENTLY EXIST, SUCH AS INCONVIENCE,DOWN TIME, WRONG STORES ETC

THE PROBLEMS THAT WILL BE ENCOUNTERED WILL BE A SYSTEM THAT CANNOT LOAD UP I.E. THE CPU WILL KEEP ON RESETING & DOING A POWER UP WITH VARIOUS BUG MESSAGES. "UNABLE TO ACCESS THE STARTUP FILES ETC.

PLEASE READ THIS DOCUMENT FIRST & IT'S A GOOD IDEA TO OBTAIN ALL THE REQUIRED SOFTWARE / KEYCODES DURING THE DAUGHTERBOARD FORMAT PROCESS AS IT WILL SAVE TIME ON SITE.

IN ORDER TO GO INTO MAINTENANCE MODE, DO A SYSTEM POWER RESET.
YOU CAN ALSO (IF REQUIRED) FLIP OVER THE TOP DIPSWITCH ON THE CPU CARD. (150 BAUD RATE!). TO VIEW ANY EXTRA SYSTEM POWER UP TESTS.
LEAVE THE EXISTING BAUD RATE DIPSWITCH SETTING AS IT IS
DURING THE POWER UP EVENT YOU WILL BE GIVEN A PROMPT TO ENTER.


Meridian Small System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r06 dev2.53
Reset Reason: 0, 0 - Reset Reason unknown
SRAM: 128 kBytes
DRAM: 16 MBytes, speed=60 ns
Security ID: 10002201 type: NT_STD
System ID: 10002201
Backup Flash: 1572 kBytes
Program Store: 24 MBytes
Flash Drive: 8 MBytes
Backwards compatible daughter board installed.
Ethernet MAC address: 00:00:75:4A:00:E1
PCMCIA card not installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.
Attempt to run Diskos: MIB is invalid.
DRAMOS load from SW Delivery Card failed.
Operating system not loaded.
Insert Software Delivery Card and enter CONTROL-I.



IF YOU HAVE MANAGED TO COMPETE THIS PART OK THEN RESTORE THE
TOP DIPSWITCH (150 BAUD RATE) ON THE CPU CARD BACK OVER TO THE LEFT &THEN DO A SYSTEM POWER RESET.

DURING THE POWER UP SEQUENCE ENTER “CTRL - I”.

INSERT THE “PCMIA” SOFTWARE CARD WITH THE CORRECT VERSION ON IT,
IN THE “A” DRIVE. (LEFT HAND SLIDE SLOT!)
IF YOU DON'T HAVE A COPY OF THE SOFTWARE ON YOUR P.C. / CD-ROM ETC, BUT YOU DO HAVE INTERNET ACCESS, THEN VISIT THE NORTEL WEB SITE

FOLLOW THE PROCEDURE AS NORMAL FOR INSTALLING THE NEW SOFTWARE.

ENTER THE KEYCODES & USE A DEFAULT CONFIGURATION DATABASE WHERE REQUIRED. (LOGIN IS "0000")

AFTER THE KEYCODES & SOFTWARE HAVE BEEN INSTALLED SUCCESSFULLY, THE CPU SHOULD BOOT UP OK AFTER 20-30 MINUTES.

NOTE!
YOU MUST DO A WARM START AFTER THE SYSTEM HAS FINISHED BOOTING UP!

THIS WILL PREVENT THE OPTION 11 CARRYING OUT ANY ROUTINES & DOING A DUMP
(Which will overwrite the customers database on the CPU!)

THE CUSTOMERS BACKUP DATABASE SHOULD STILL BE OK ON THE “Z” DRIVE, & YOU WILL NEED TO RESTORE IT BY GOING INTO LD 143 (ON TTY 0)“ UPGRADE / UTILITIES / RESTORE FROM FLASH ROM ETC”
("upgrade" c/r then"3" c/r followed by "1" c/r & "1" c/r Then use "Y" c/r)


THE CUSTOMERS DATABASE DUMP (USUALLY FROM THE NIGHT BEFORE!) WILL BE LOADED INTO THE MAIN MEMORY FROM THE INTERNAL BACKUP (CPU) DRIVE.


THIS CAN NOW BE CHECKED BY EXITING LD 143 & GOING INTO LD 43.
WITHIN LD 43, ENTER "DAT" & YOU SHOULD SEE THE INTERNAL BACKUP / MAIN AT THE SAME PARAMETERS. I.E.

>LD 43

.DAT
DATABASE ISSUE DATE(d/m/y)/TIME SIZE(recs) SEQNO
Main 2540B 06/11/2002 at 02:01:36 167 2169
Secondary 2540B 05/11/2002 at 02:01:40 167 2168
IntBackup 2540B 06/11/2002 at 02:01:36 167 2169
PCMCIA database not accessible.
Current external backup is on PCMCIA drive B

ONCE THIS HAS BEEN DONE YOU MUST DO ANOTHER SYSTEM POWER RESET TO ACTIVATE & RESTORE THE CUSTOMERS DATABASE.


NOTE!

THIS TIME TTY LOGIN WILL NEED TO BE DONE USING THE CURRENT "KNOWN" PASSWORDS.

REMEMBER TO REINSTALL THE PATCHES FOR THAT SITE.

YOU SHOULD NOW HAVE A FULL WORKING SYSTEM WITH A CUSTOMERS DATABASE CONFIGURATION THAT SHOULD BE AT WORST ONLY 24 HOURS OLD & THEREFORE IT WILL NEED VERY LITTLE OR NO ON SITE PROGRAMMING TO BE CARRIED OUT!


E-MAIL ME daviddotbromleyoneatbtinternetdotcom


All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Firebird Scrambler]

Using the site ID that you had, I took a look on Nortels site and your system should have had V25.40b software installed. i.e.

Software Release & Issue 25.40b
Security ID 10232075
Auxilary ID 10232075
Packages 0-2,4,5,7-14,16-21,23-25,28,29,32-36,40-61
,64,70-77,79-81,83,86-93,95,98-105,107-111,113-120,122,
124,125,127-129,131-133,137-141,144-146,150-155,157,160
-164,167,169,170,172,173,178-182,184-187,191,193,195,19
8,200,202-206,208-212,214-216,218,222,225,229,233-236,2
40,242,243,245-247,250,251,253-256,258,259,261,283,289,
294-297,301,306-311,315,323,324,327,328,332,333,347,349
-351,362,364,380-382,384,386,387,389
Extra Packages 22,121,174
TNS Level 2500
ACD Agents 27
ACD DN 300
MOPT 0
AST 5000
LTID 64
RAN Routes 128
RAN Connections 4
Music Connections 30
BRI DSL 2500
BRAND 2
WIRELESS TELEPHONES 0
DIGITAL TELEPHONES 64
ANALOGUE TELEPHONES 16
TMDI D-CHANNELS 64
ITG ISDN TRUNKS 0
INTERNET TELEPHONES 4
ATTENDANT CONSOLES 2500
CLASS TELEPHONES 2000
DATA PORTS 2500
PHANTOM PORTS 2500
TRADITIONAL TRUNKS 2500
SURVIVABILITY 0
FEATURE SET NTSK03GR 25.40b R25.40 b ENHANCE
D CALL CENTER SERVI
MODEL OPT11C
WIRELESS VISITORS 0

I'm assuming that you have the keycodes?.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[thattekguy]

After you download the software you need to save it to your pcmcia card and then you need to double click the file so it runs and opens the other files needed..MDCS..etc otherwise it will never boot from the card