How to increase the page size in Crystal 3

[Vpal]

Please do let me know how to increase the report size horizontally to add more columns...
Thank you
Vpal

 

[kskid]

It depends on the Crystal Version and print drivers you have but in 8.5, click on File -> Printer Setup -> Landscape

If you need more than 11", then use the Standard MS WIndows HP Designjet 3500 CP printer driver, it will net about 108" when in Landscape.

 

[Turkbear]

Hi,
The page size is controlled by the printer settings..
So, go to Printer Setup on the File menu and select Landscape Mode..This will usually be as wide as the current printer will print..You can install other printers ( even if you do not actually plan to print to them) that will allow almost any size..

 

[lbass]

This is set in the printer settings. Go to file->printer setup->landscape. You can set the paper size to legal as well. Certain printers allow you to create very wide reports. You might do a keyword search on this to get specifics.

-LB

 

[lbass]

Multiple crossposts here, and I guess I was slower than the rest!

-LB

 

[Turkbear]

Hi,
At least VPal asked a question that lots of us knew the answer to...( Good for a Friday )