Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Get Work Line Appearance and Dialing By 0 Togethers ?

Status
Not open for further replies.

ziedhanbli

IS-IT--Management
Jan 25, 2007
43
Hi for all , rei have tried to work with Line appearance (dict access to the Line by Pushing Buttom of the phone ) and also i want to Dial the Lines By " 0 " . but the problem that i cant work with the two fonctionnalities at the same time .

* when i do this Short code i can Direct dial By Pushing Buttom :

0 / . /Secondary dial Tone
[0]7N; /7N /Dial/0

but i cant dial by "0"


when i do this Short code i can Direct dial By "0" and i not by Line appearance : ( i just eliminate the " ; " )

0 / . /Secondary dial Tone
[0]7N /7N /Dial/0
 
Put a zero in the line prefix field ( all lines!).
Change the Shortcodes like this:
0/./SecondaryDialTone/LineID = 0

[0]N;/0N/Dial/LineID = what is required

 
yes i have putted a zera in all of the lines prefix , but the same problems ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top