How to get rid of the ;1 from the file name on CD's (HP-UX 11.0)

[kerri]

Hi, I'm a new HP-UX user and here's my problem.

We are just starting to support HP-UX for our product. In the past we have burned the CD master at our office then sent them for duplication.
Well, if I put the CD we make in the HP-UX, all the file names have the ;1 at the end of them.
I have read in many forums about using pfs (?) to fix this. But as far as I can tell I don't have that on the system.
Where can I get it, and will this allow me to burn the CD using the Joliet system? Or should I keep using the ISO9660 format?
Right now neither work.

Thanks for any and all help. We're stumped.

Kerri

 

[ramirezfj]

Hi,
try to mount the CDROM using
mount -r -o cdcase /dev/what_ever /what_ever

The o option with cdcase will work and must show you the names in it's real form (I had the same problem and this answer was the simpliest solution).

Bye,
Javier Ramirez

 

[Guest_imported]

This CD is probably in RockRidge format.
Add an entry to your /etc/pfs_tab file in this format
<device_file> <mount_point> <filesystem_type> <translation_method>
e.g.
/dev/dsk/c5t2d0 /SD_CDROM pfs-rrip xlat=unix 0
Next start the pfs daemons with the following commands (as root) -
nohup /usr/sbin/pfs_mountd &
nohup /usr/sbin/pfsd &
then insert the CD and run the following to mount the disk -
/usr/sbin/pfs_mount /SD_CDROM
This info is straight off the Oracle CD which always comes in this format.

 

[Birbone]

mount -F cdfs -o cdcase,nosuid /dev/dsk/c#t#d# /cdrom

-B

 

[MikeLacey]

judgedeath has the right answer

Mike

"Deliver me from that bane of civilised life; teddy bear envy."

Want to get great answers to your Tek-Tips questions? Have a look at faq219-2884