My customer wants to bring in 4 PRIs for his voice network. He has a 6509 with a channelized T3 module with room on the T3 for the PRIs. I need to ge the PRIs off the T3, and out of the 6509 into a 2811. The 6509 does not have sufficient resources to support a WC-SVC-CMM. Any help would be appriciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to get PRIs out of a 6509 with a T3 module
- Thread starter honest1
- Start date
I'm not 100% sure if you can do what you want with the 6500/Ds3 module..
but try this link:
basically what you want is TDM connect..
BuckWeet
but try this link:
http://www.cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a008010f05d.shtml
basically what you want is TDM connect..
BuckWeet
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question