Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to get into top compartment of 11c cabinet?

htroberts

MIS
Feb 2, 2010
11
US
I have an option 11c I’d like to try to get running, just for fun. I didn’t think it came with a wall mounting bracket and was looking for one online, but moving the cabinet recently, I realized there’s one in the air vent space above the card cage.

It looks like you could push in a couple of tabs and pull the front trim piece off, but I’ve tried that and don’t want to push any harder for fear that I’ll break it.

I don’t think this space was intended to be opened in the field, but has anyone been able to remove that piece without breaking it?
 
Push the tab and flip up like a hinge if I remember right
 
Yes, just push in the 2 tabs and swing it up.
 
If the Option 11c cabinet can move right or left with the two mounting screws removed that are found bottom left and right inside the cabinet, then just lift it straight up!
 
I have an option 11c I’d like to try to get running, just for fun. I didn’t think it came with a wall mounting bracket and was looking for one online, but moving the cabinet recently, I realized there’s one in the air vent space above the card cage.

It looks like you could push in a couple of tabs and pull the front trim piece off, but I’ve tried that and don’t want to push any harder for fear that I’ll break it.

I don’t think this space was intended to be opened in the field, but has anyone been able to remove that piece without breaking it?
in case the text wasn’t clear, I’m trying to remove the piece outlined in red from the rest of the cabinet.
 

Attachments

  • IMG_7396.jpeg
    IMG_7396.jpeg
    750.9 KB · Views: 14
You have 2 tab to push with a screwdriver and flip up
thanks, that confirms what it looked like. I had to push harder than I wanted to originally for fear of breaking it, but it did open and I got the bracket, plus a bonus QIC tape cartridge!
 

Part and Inventory Search

Sponsor

Back
Top