How to get analog CLID on a BCM 50 3.0?

[esoare]

How to get analog CLID on a BCM 50 3.0?

I looked in the tbg 3.0 and it shows a CTM 4 or CTM 8. No part number. I look in the price book and can't find a CTM at all!!
What is up? Can the BCM 50 do analog CLID trunks?
Customer wants that (rather than going to PRI right now).
thanks!
es

 

[countrytime]

Look for GATM4 or GATM8. The 8 port is

 

[esoare]

OK. I see those of course, I just didn't know that they would do the CLID stuff. Thank you for your input!!
es

 

[countrytime]

Look for GATM4 or GATM8. The GATM4 is NT5B44BAAEE5.

 

[CTCINY]

The answer to your question is yes. BCM does the Caller ID. I know on the old BCM you needed a CTM4 or 8 to get CLI. That is no longer the case. Those parts are no longer manufactured by Nortel. GATM4 and GATM 8 will work for CLI.

What doesn't kill you only makes you stronger.

 

[esoare]

The analog ports on the Main BCM unit also does CLID, right?
Just wanted clarification.
es

 

[cook1082]

Yes!

 

[esoare]

Thanks!

 

[acewarlock]

But you need Keycodes to use them.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.