Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to FORCE UM8000 to read licensing from SV8300/SV9300 WITHOUT PBX Reboot!!!

Status
Not open for further replies.

John Robertson

Systems Engineer
Jul 12, 2018
38
US
Ever have a client that will pretty much NEVER let you reboot the PBX? Well, I take care of some airlines that are pretty much 24X7. This may be valuable to someone...

Login to the VM using Putty U:support P:voice
Select option 3: Control
Select Option 1: Stop Messaging system software
once stopped right click the banner and select duplicate session.
Use the credentials above
Select Option 2: Maintenance
Select Option 3: Command prompt
Enter cd /root press Enter
Enter sudo ./start_local Press Enter
about a paragraph of information will display after the UM8000 reads licensing from the SV8300/SV9300. This is the licensing that has been applied to the UM8000 from the SV8300/SV9300
Go back to the Control Putty Session and select option 1 to start voice messaging software.

Once the VM is back up you should see your licensing in the Admin Console under System>Licensing.

JR
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top