How to Force calls down one route...

[esean2k]

Can anyone help please! I need to know the steps to force all calls to Mobiles phones to take only one route.. IE via a GSM gateway which as been installed.

Have installed a dedicated 2mb DPRI card using MSDL for signalling, I’ve built the loop and dch, RDB and channels. Can now see layer 2 activity on the GSM G/W.
But can’t figure out how to force 077/078/079 etc numbers down one specific route.

Any help would be hugely appreciated… Thanks.

Sean

 

[johnpoole]

ld 86
new
rlb
20 (any vacant rlb)
entry 1
route x
frl 1 (this lets ncos 1 and above use that route))

then in 87
new
cdp
077
rli 20

the rest of the prompts in those two load are pretty much default.. 077 would need to be a vacant dn in your switch.. if your using 0 for ac1 let me know, it almost the same steps but in load 90


john poole
bellsouth business
columbia,sc