How to erase an analog extension ? 1

[MDUserSergey]

Hello, professionals. I need help.
I have an MX-One TSW sp6. And it works fine. But one of subscriber tell me Bye! And I need to erase his analog port from my TSW. But it is not erasing ! See it parameters:
<SUDIPIR=5730;
DIRECTORY INFORMATION AT 09:16:30 28JUN22
DIRECTORY NUMBER : 5730
TYPE OF DIRECTORY NUMBER : ATS
NAME : Exten
ADDITIONAL NUMBER :

EXTENSION TERMINAL DATA
EQU TERMD ADN
7-1-50-26 0000000

EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST LANG BSEC MCOST
4 01040401 0202120000 011131000 000001 0 010000001 4 - 0 -

EXTENSION MULTIPLE DIRECTORY NUMBER DATA
DIR KEY CALALT
*5730 - -
COMMAND LOST

<


And how can I erase it ? It is not work !

 

[inlsp05]

extee:dir=5730;
y;


PG4E

 

[MDUserSergey]

Heh, if all will be simple ...
<PELPEIR=5730;
PELPEIR=5730;
SURE? (YES/NO)
<Y;
EXECUTED

<SPEXEIR=5730,OPT=N;
NOT ACCEPTED
SPEC PURPOSE EXTN
NOT ASSIGNED
<extee:dir=5730;
EXTEEIR=5730;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
DIR 5730 IS
MULTIPLE REPRESENTED

 

[MDUserSergey]

But I'm not saw where is my Exten is represented ...
Can I erase it enother way ?

 

[bpetya]

KSMDP:MDN=5730;

then you will see which extensions have MDNs that need to be deleted
KSMDEIR=xxxx,MDN=5730;

If you delete all of them, EXTEE will work after that

 

[MDUserSergey]

Heh, if all will be simple ...
It said:
<KSMDP:MDN=5730;
KEY SYSTEM MULTIPLE DIRECTORY NUMBER DATA
MDN DIR KEY CALALT
5730 *5730 - -
WAIT
COMMAND LOST

But I'm not saw where is my Exten is represented ...

 

[MDUserSergey]

Can I check all the DTS in PBX ?
Yes, seriously ?
But there are more than 150 ... And any of SUDIP of DTS said WAIT; COMMAND LOST ...
What else can I do ?

 

[MDUserSergey]

But may be to restart any units and erase this Exten ?

 

[MDUserSergey]

No way ?

 

[ges69]

Hi, if you are returned "command lost" surely there is a problem with some program unit or a data corruption.
Try to restart program unit ELP6:
RFPUI:UNIT=ELP6,LIM=1;

I hope it can help you....

 

[MDUserSergey]

Look:
<RFPUI:UNIT=ELP6,LIM=7;
RFPUI:UNIT=ELP6,LIM=7;
SURE? (YES/NO)
<Y

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
7 ELP6

EXECUTED

<EXTEEIR=5730;
EXTEEIR=5730;
SURE? (YES/NO)
<Y;
NOT ACCEPTED
DIR 5730 IS
MULTIPLE REPRESENTED
<




/* -------- */
... MULTIPLE REPRESENTED

Restart of ULP6 not helped.
Is there another chance ?
Maybe restart another UNIT work wirh multiple represense in PBX ?

 

[ges69]

As bpetya say:

KSMDP:MDN=5730;

then you will see which extensions have MDNs that need to be deleted
KSMDEIR=xxxx,MDN=5730;

If you delete all of them, EXTEE will work after that (I hope!!!)

 

[ges69]

Try to restart KLP1M program unit also......

From ALEX:
KLP1M Administers a specific line pick-up number (MDN) which has multiple representation via own (ODN) or additional (ADN) directory number for some other telephone.

 

[MDUserSergey]

to ges69:

I have 3 LIMs where all digital (KS) phones locate: ##9, 10, 11. And look at this:

<RFPUI:UNIT=KLP1M,LIM=9;
RFPUI:UNIT=KLP1M,LIM=9;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
9 KLP1M

EXECUTED

<RFPUI:UNIT=KLP1M,LIM=10;
RFPUI:UNIT=KLP1M,LIM=10;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
10 KLP1M

EXECUTED

<RFPUI:UNIT=KLP1M,LIM=11;
RFPUI:UNIT=KLP1M,LIM=11;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
11 KLP1M

EXECUTED

<KSMDP:MDN=5730;
KEY SYSTEM MULTIPLE DIRECTORY NUMBER DATA
MDN DIR KEY CALALT
5730 *5730 - -
WAIT
COMMAND LOST

<

It's pity ...

Any ideas ?..

 

[ges69]

ok, try to restart ELP6 and KLP1M program unit in LIM 1:
RFPUI:UNIT=ELP6,LIM=1;
RFPUI:UNIT=KLP1M,LIM=1;

then try again
KSMDP:MDN=5730;

if it still doesn't work, try this:
BLEQI:EQU=7-1-50-26;
RFBOI:BPOS=7-1-50;
BLEQE:EQU=7-1-50-26,ALLFM=YES;

and then
KSMDP:MDN=5730;

I don't work anymore on TSW systems from many years, but I hope I helped you
and sorry for my poor english

 

[MDUserSergey]

to ges69:

Thank You for variants. But no result. Look:

<ALLOP;
ALARM LOG
IDENTITY:
VERSION: CXP1010139/4/TSWSP06/R7D

DATE: 05JUL22 TIME: 06:34:05
NO ALARMS IN LOG
LAST ALREI: 05JUL22, 06:29:43

END
<RFPUI:UNIT=ELP6,LIM=7;
RFPUI:UNIT=ELP6,LIM=7;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
7 ELP6

EXECUTED

<RFPUI:UNIT=KLP1M,LIM=7;
RFPUI:UNIT=KLP1M,LIM=7;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
7 KLP1M

EXECUTED

<KSMDP:MDN=5730;
KEY SYSTEM MULTIPLE DIRECTORY NUMBER DATA
MDN DIR KEY CALALT
5730 *5730 - -
WAIT
COMMAND LOST

<BLEQI:EQU=7-1-50-26;
EXECUTED
<RFBOI:BPOS=7-1-50;
RFBOI:BPOS=7-1-50;
SURE? (YES/NO)
<Y;

RESTART BOARD
STARTED BOARD:S FAILED BOARD:S
7-1-50

EXECUTED
<BLEQE:EQU=7-1-50-26,ALLFM=YES;
EXECUTED
<KSMDP:MDN=5730;
KEY SYSTEM MULTIPLE DIRECTORY NUMBER DATA
MDN DIR KEY CALALT
5730 *5730 - -
WAIT
COMMAND LOST

 

[MDUserSergey]

I write a command-file with this 6 commands and F4 it to WinFIOL channel. It worked one by one without timeouts. But You are see that positive result not found.

 

[ges69]

Hi MDUserSergey,
last chance.....
as I said above, try to restart ELP6 and KLP1M program unit in LIM 1 (ONE), not in LIM 7 (SEVEN)

RFPUI:UNIT=ELP6,LIM=1;

RFPUI:UNIT=KLP1M,LIM=1;

 

[MDUserSergey]

to ges69:

<RFPUI:UNIT=ELP6,LIM=1;
RFPUI:UNIT=ELP6,LIM=1;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 ELP6

EXECUTED

<RFPUI:UNIT=KLP1M,LIM=1;
RFPUI:UNIT=KLP1M,LIM=1;
SURE? (YES/NO)
<Y;

RESTART PROGRAM UNIT
LIM STARTED PU:S FAILED PU:S
1 KLP1M

EXECUTED

<KSMDP:MDN=5730;
KEY SYSTEM MULTIPLE DIRECTORY NUMBER DATA
MDN DIR KEY CALALT
5730 *5730 - -
WAIT
COMMAND LOST

 

[ges69]

Hi MDUserSergey,
the last two things to try are the SFCEI and RFEXI commands:

SFCEI;

From ALEX:
"Start of the entire system in phase 1.3 and 1.5.
All program units in all LIMs receive the start signal for start phase 1.3 and start phase 1.5.
In start phase 1.3 all program units are able to fetch information of the static data type.
In start phase 1.5 all program units can exchange information with one another.

The command is used after a command whose activity demands that phase 1.3 and 1.5 has been executed throughout the entire system, or when something has occurred in the system that demands the execution of phase 1.3 and 1.5 throughout the system."

KSMDP:MDN=5730;
if it still doesn't work (COMMAND LOST).....

RFEXI;

From ALEX:
"Restart of the entire system.
All program units in all LIMs obtain start signals for restart phase 1, start phase 1.5 and restart phase 2.
In restart phase 1 all necessary variables are initiated and time measurement is requested.
In start phase 1.5 all program units can exchange information with one another.
In restart phase 2 the program units are prepared for traffic.

As the restart affects program units that are active I/O-administrative, the printout will be issued as a result printout after the restart.

A condition in order to get the command executed is that the system is started in start phase 2."

But be careful, these commands block the whole system for some time and all calls in progress will be cut down

Good luck!!!!