Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to enable web interface on Cisco 1941 Router? 1

Status
Not open for further replies.

mlgmartin

Vendor
Jul 6, 2010
108
PH
I have already tried this one with no good result.

ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000

I have GE0/0 (WAN) and GE0/1 (LAN). My Management PC is connected on GE0/1 via cross cable with the same subnet.



"It is an equal failing to trust everybody, and to trust nobody.
 
remove the ip http access-class 23
or
make sure that your machine is allowed in access-list 23
 
don't forget to enable username and password including enable secret
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top