How to distinguish internal and external calls with rings?

[PTALLY]

Hello,


I need to know how if possible to be able to have all internal calls ring with a single ring and all external calls ring with 2 rings. Can this be done any help would be greatly appreciated.

Thank You,

PTALLY

 

[wdhb]

LD16 - in the Route data block - set DRNG to YES & you will get a different ring cycle for internal / external calls

 

[PTALLY]

If you go into this ld 16 will you chg anything else when you just want to chg the DRNG to yes?

Like

ld 16
req: chg
type: rdb
route: (From here on do I have to put anything or what do I need to just chg the drng to yes?

I would appreciate any help.

Thank you,

PTALLY

 

[freddog]

At the ROUT prompt, you need to enter the particular route that you want to enable distinctive ringing on. From there you can <Enter> past everything until you get to DRNG. After changing DRNG to YES, you can <Enter> past the rest of the prompts.