how to display information from two IP nets

[moltra]

I have an Apache 1.3.33 server running on Windows xp computer with 2 network cards. IP addresses are 192.168.100.x and 192.168.101.x. The web server is configured for the 192.168.100.x network. I want to pull data off the 192.168.101.x network and display it using Mambo. Is there someplace in the Apache Configuration that will allow me to do this?

I appreciate any and all help.

Moltra

 

[lgarner]

What do you mean by "pull data"? Your server should be able to see network resources on both networks (at least).

 

[moltra]

the 2nd IP addresses come from a switch not a router. I have to change my computer's IP address to see the second ip addresses. The 2nd set of IP addresses come from A PLC, and 8 variable freq. drives. and a panelview.

 

[thedaver]

Your server has 2 NICs?
Then each NIC should be assigned an IP and subnet
Each subnet should be properly defined in your network routes.
You should be able to simultaneously process data from each subnet.
Unless both lgarner and I are both totally missing an essential element of your problem, I think you're barking up the wrong tree.

D.E.R. Management - IT Project Management Consulting

http://www.dermanagement.com/

 

[moltra]

Each subnet should be properly defined in your network routes.
How do I do this. the web server is running on a windows xp tower with 2 nic's.

 

[thedaver]

You need to take that to a Windows forum. I assume it's routine configuration.

D.E.R. Management - IT Project Management Consulting

http://www.dermanagement.com/