Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to disable PC port on avaya 1608 Voip Phone

Status
Not open for further replies.

TriniTech87

Technical User
Jul 4, 2016
70
TT
Hi guys does anyone have a clue as to the process of disabling the PC port on an avaya 1608 phone ?
 
## PHY2STAT specifies the speed and duplex settings for the secondary (PC) Ethernet interface.
## Valid values are 0 through 6; the default value is 1.
## Value Operation
## 0 disabled
## 1 auto-negotiate
## 2 10Mbps half-duplex
## 3 10Mbps full-duplex
## 4 100Mbps half-duplex
## 5 100Mbps full-duplex
## 6 1Gbps full-duplex if supported by hardware, otherwise auto-negotiate
## This parameter is supported by:
## H1xx SIP R1.0 and later (values 0-5 only)
## 96x1 H.323 R6.0 and later
## 96x1 SIP R6.2 and later (values 0-5 only)
## 96x1 SIP R6.0.x
## 96x0 H.323 R1.0 and later
## 96x0 SIP R1.0 and later
## 46xx H.323 R1.8 and later (values 0-5 only)
## 46xx SIP R2.2 and later (values 0-5 only)
## 16xx H.323 R1.0 and later
## 16CC SIP R1.0 and later
## 1603 SIP R1.0 and later
## SET PHY2STAT 1
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top