how to determine the following sequence with muliple CR/HR/MR/MR/MR/TR

[730ADHOC]

I'm having issues trying to set the correct scanner -i sequence for the following sets. In the past I'd usually have a set where it would only have 3 tape set and the sequence would be easily deciphered with correct sequence.

Getting sets like below that are giving me issues with trying to get a complete and succesful restore.
Confused with how the orders are falling in cr/hr/mr/mr/mr/tr etc
see below:

Can anyone feed me a bone on why or how to determine these types of sets to successfully get a restore going?

date time name ssid FL volume
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 cr LXM963
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 hr LXI207
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 mr LX1222
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 mr LX1226
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 mr LX1230
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 mr LXI211
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 mr LXI217
9/13/2008 20:11:19 MSEXCH:IS/SG1 4073459778 tr LX1234
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 cr LXM964
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 hr LXI207
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 mr LX1222
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 mr LX1226
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 mr LX1230
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 mr LXI211
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 mr LXI217
9/13/2008 20:11:11 MSEXCH:IS/SG2 4207677501 tr LX1234
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 cr LXM964
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 hr LXI208
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 mr LX1220
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 mr LX1224
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 mr LX1231
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 mr LXI213
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 mr LXI215
9/13/2008 20:11:12 MSEXCH:IS/SG3 4190900286 tr LX1237

 

[605]

There is no possibility to determine the volume sequence - you can only check the volume sequence for a certain save set.

If you want to determine the proper sequence for a certain save set that even has more than one 'middle' part, you can use mminfo as well to report the sequence. Here is an example:

D:\>mminfo -q ssid=4217039090 -r "ssid,volume,sumflags,first,last"
ssid volume fl first last
4217039090 123456 hb 0 5062035
4217039090 123457 mb 5062036 10095219
4217039090 123458 mb 10095220 15128403
4217039090 123459 mb 15128404 20161587
4217039090 123460 tb 20161588 32060499