Our hospital is replacing their NEC NEAX 2400 IPX, and I have been requested to find out the number of digits we send and the number that we recieve through our PRI's... I contacted the circuit provider but feel nervous about his answers because there were alot of ummmm's and hmmmm's followed by alot of please holds.... What would the commands be to help me determine this info in the switch so that I can verify the info that I received??.. Thanks Much.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to determine digits sent and recieved.
- Thread starter doeswhat
- Start date
belevedere
Instructor
ARTD CDN 66 (LRTD). Is for the number of incoming digits. However, sometimes it's left at 15 which can handle any number of incoming digits. Usually it's set for 3 or 4.
For outgoing, look a AMND (LMND) to see the number of digits allowed for outbound. This setting has no bearing on telco. They take what we send then process the call accordingly.
For outgoing, look a AMND (LMND) to see the number of digits allowed for outbound. This setting has no bearing on telco. They take what we send then process the call accordingly.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question