How to denie calls on phone

[manswar]

Hi Friends,

I have to program a phone such as it should be able to access only internal call (Site wide calls only).

User should not be able to dial out by using 9.

I have tried TTD and TLD in CLS but calls are going through using 9.

how can i restrict users.

regards,
Sam

 

[bhassell2000]

what is targ and tgar on phone and trunks?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[cmawbey]

Another method of barring calls is by applying one of seven alternatives in the extension's Class of Service
The seven Class of Service types are:-
UNR - Unrestricted The extension user can dial anywhere they want - literally without restriction.
FRE - Fully Restricted No exchange line access. The extension user can make internal calls, can use privately wired (Tie) lines, however they can have calls using exchange lines transferred to them from another extension user.
FR1 - Fully Restricted 1 Same as FRE, but calls using exchange lines cannot be transferred to them.
FR2 - Fully Restricted 2 This restricts the extension to internal calls only.
SRE - Semi-restricted Allowed outgoing external calls via the attendant console only. Can receive external incoming calls.
TLD - Toll Denied Allowed outgoing calls to certain destinations only. The Meridian 1 monitors the digits that are dialled to determine if the call is to be allowed. This process is called New Flexible Code Restriction.
CTD - Conditionally Toll Like TLD, CTD checks the digits dialled, however CTD Denied only applies when a PSTN route is chosen as an alternative to a private network call.

 

[manswar]

TGAR is 0 on the phone

TARG
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
OOD 1
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
CRD 512

IENB 5
TFD 0
LEXT 100
VGD 6
SST 3 0
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DRNG NO
CDR YES

 

[manswar]

It worked .... Thanks alot guys..

Cheers
Sam