Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to create/configure a line for hearing impaired device

Status
Not open for further replies.

avi777

Technical User
Jul 22, 2014
29
US
Having problems configuring an Ultratec Uniphone Combination TTY and Telephone device for a customer that has an employee
with hearing impairment. Configured the line as analog since the device connects via regular 2-wire analog line according to the
manual. Has anybody out there been confronted with or have experience connecting such device. My platform is an Avaya Aura CM6.0
I have attached the equipment manual the customer is using.

Thanks.
 
 http://files.engineering.com/getfile.aspx?folder=65c1d0b6-f3d9-4099-8b70-9c5c3d844e38&file=Uniphone1140_Manual.pdf
whats the problem?
I'd imagine configuring it like a basic analog phone would be enough.

What, specifically, isn't working right?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top