Hello frends,
I set up a NIU's ether port according GIGC application and connected a VOICE MAIL. I can not find any heartbeat(98) signal. Why?
Who can explain follows below from ALEX?
----------------------
Signal format over Ethernet
All signals between PABX and the information system in the following sections are preceded by character SOH and signal tag K when sent over the Ethernet.
Every signal sent will be responded by the receiving side with an acknowledgement signal. All signals are tagged with a tag number K. The same tag number is returned in the acknowledgement signal.
------------------------
Thank you everybody.
wfhy
I set up a NIU's ether port according GIGC application and connected a VOICE MAIL. I can not find any heartbeat(98) signal. Why?
Who can explain follows below from ALEX?
----------------------
Signal format over Ethernet
All signals between PABX and the information system in the following sections are preceded by character SOH and signal tag K when sent over the Ethernet.
Every signal sent will be responded by the receiving side with an acknowledgement signal. All signals are tagged with a tag number K. The same tag number is returned in the acknowledgement signal.
------------------------
Thank you everybody.
wfhy