how to connect two KX-TDE100 IP PBX 1

[sunqtr]

i have two sites with KX-TDE100 PBX. both sides are connected by IP VPN. can someone guide me on how to setup the PBX to talk to each other VIA the IP VPN.
Site A the numbering scheme is 1xx and Site B the numbering scheme is 2xx.

reguest your help please..

K Ar

 

[obtsystems]

You install a gateway card in each virtual slots and program the IP address for each system on each side and set the dn2ip

Once you can dial 7 and the extension number of each side you can then set up number plans

 

[sunqtr]

Thank you obtsystems

we have installed the DSP card on both sides. IP Virtual Trunk card is installed. under numbering scheme other PBX number is added. but seems that we are missing something> can someone help us with a step by step checklist........

regards

 

[esys8]

Hi,

I would like to help, but not really sure what problem you faced. Since we have successfully configure and are now using this feature, Please double check you IPGW4E (Gateway) Card Configuration. Both cards should have both information for each PABX.

Eg, GW ENTRY & DN2IP ENTRY should have both PBX details, IP Address, Group Number, Etc.. >> This should have be done one side side (Card (A)) and download the configuration and upload to another card (B)

Good Luck!