How to connect two emg80 in two different sites

[Malik SA]

Hello all,
What i have to do for connecting 2 emg80 installed in two different sites.

Regards

 

[martinhodge]

your need a networking license installed on each site which you will need to obtain from a local reseller .

you will need a static IP address at each sites internet connection and you will need a router that you can set up firewall rules and portfording on .

each site will ideally need to be on its on extension plan . ie

1xx
2xx

set up the correct port forwarding and then set up the networking tables correctly between the sites .

where are you in the world?

there is a bit or programming to be done on each system . but its not that difficult once you get your head round it .

who ever you order your license from should be able to assist you with setting it up .

 

[Malik SA]

Thank you Mr martinhodge, it was so helpful for me.

I'm in Tunisia and the other site in France.
It's better to have a static ip address for each system or a VPN?


I have another question: in case i have just one system, if i want to use an IP phone from another site, i must just have an static ip address for the system ? or there is other things?

 

[martinhodge]

yes you will need a static address for a remote phone otherwise every time the ip address changes you will need to update the phone .


i prefer the static address method .

 

[Malik SA]

Thank you Mr martinhodge
another question: in case i have just one system, if i want to use an IP phone from another place, i must just have an static ip address for the system ? or there is other things?

 

[martinhodge]

yes you need a static address as i said above otherwise you will have to keep changing the settings on the phone to update the address every time the address changes

 

[Malik SA]

Thank you Mr martinhodge that was helpful