how to connect hub to wall mount 2

[XofCDe3rd]

I would like to connect a couple of PCs to a hub via a wall plate with a 568A style RJ45 connector.
equipment on hand:
1) 1 hub
2) 3 or 4 wall plates
3) more than enough utp cable and jacks

question:
1)should I connect using straight thrusd from hub to wall plate and wall plate to PC
2)what coding should I use 568A or B

 

[buitenhek]

Straight thru 568A (w/green,green,w/orange,blue,w/blue,orange,w/brown,brown)

Use the cross-over only to extend a hub port to another hub. Although many moons ago for me, using a 568A with a 568B will give you a cross-over cable (in affect).

Regards
Peter Buitenhek
Profit Developer.com

 

[Servamatic]

For pinout drawings this link may help.

http://www.servamatic.net/html/pinouts.html

Peter is right, you should be using T568A unless specified differently by equipment manufacturer or customer.

Richard S. Anderson, RCDD

http://www.smartbuilthomes.com