We have the Coral IPx system with two SIP phone licenses. We purchased a Linksys SIP phone, but do not know what settings are necessary in the phone itself. We have programmed the MAC address in the system itself to match. Anyone have knowledge on the SIP setup?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to connect a SIP phone to the Coral IPx Office system
- Thread starter gmincher
- Start date
disturbedone
Vendor
For SIP devices you don't use the MAC address. SIP is a username/password based process.
For 3rd party SIP devices you will need to have purchased the 3rd Party SIP authorization licence and have it installed on the Coral. This is different to a Tadiran SIP licence.
Then in IP,1,4 (SIP Terminals) is where you enter the details. Also in IP,0,1 you need to set standard IP settings including default SIP parameters.
What system & software version are you on?
For 3rd party SIP devices you will need to have purchased the 3rd Party SIP authorization licence and have it installed on the Coral. This is different to a Tadiran SIP licence.
Then in IP,1,4 (SIP Terminals) is where you enter the details. Also in IP,0,1 you need to set standard IP settings including default SIP parameters.
What system & software version are you on?
- Status